MFP Midera Food Processing, Inc.

NASDAQ
$43.43

Midera Food Processing, Inc. Q3 F2026 Earnings Call Transcript

AI Conference Call Analysis

Sign in or subscribe to read.
Conference Operator
Operator
Good day and thank you for standing by. Welcome to the Madeira Food Processing third quarter 2026 earnings call. At this time, all participants are in a listen-only mode. After the speaker's presentation, there will be a question and answer session. To ask a question during the session, you'll need to press star 1 1 on your telephone. You will then hear an automated message advising your hand is raised. To withdraw your question, please press star 1 1 again. Please be advised that today's conference is being recorded. I'd now like to hand the conference over to Rob Fagan, Vice President, FP&A, and Investor Relations. Please go ahead.
Rob Fagan
Vice President, FP&A and Investor Relations
Thank you, operator, and good morning, everyone. Thank you for joining us for Madera's third quarter 2026 earnings call. Alongside me today are Mark Salman, Chief Executive Officer, Amy Campbell, Chief Financial Officer, and Mark Bowie, Chief Operating Officer. This conference call is being webcast live within the investor section of our website at madera.com, and a downloadable version of today's presentation is available there as well. A webcast replay will be posted to our site following the call. You can also reach our investor relations team at investors at madera.com. Before we begin, please note that today's discussion will include forward-looking statements regarding our business outlook, operating performance, capital allocation plans, market conditions, and other future events. These statements are subject to risks and uncertainties that may cause actual results to differ materially from those projected. Please refer to the cautionary statement in today's earnings release and the risk factors in our SEC filings. We undertake no duty to update forward-looking statements except as required by law. We will also refer to certain non-GAAP financial measures. The company believes that its presentation of non-GAAP financial measures is useful because it provides investors and securities analysts with the same information that it uses internally for purposes of assessing its core operating and financial performance. One item regarding non-GAAP measures. Our separation from Middleby was completed on July 6, 2026, at the start of the third quarter, and the third quarter reflects our results as a standalone public company. Results for the first six months of 2026 and prior year results are presented on a carve-out basis. Where we refer to estimated standalone adjusted EBITDA, that measure reflects management's view of profitability fully burdened by our estimated standalone public company costs. which are not fully reflected in Middleby's historical segment reporting and are not fully captured in the carve-out financial statements. We continue to present our recent historical results on this estimated standalone adjusted basis so that our reported performance, our guidance, and our median term framework are all measured the same way. Historical reconciliations to the most directly comparable GAAP measures are available in today's earnings release and accompanying materials posted on our investor relations website. A reconciliation of forward-looking adjusted EBITDA to the most directly comparable GAAP financial measure, net earnings, is not available because the timing and magnitude of certain items cannot be reasonably estimated at this time without unreasonable effort. With that, I would like to turn the call over to Mark.
Mark Salman
Chief Executive Officer
Thank you, Rob, and good morning, everyone. Before I turn to the quarter, I want to recognize our people. This was our first full quarter as an independent public company, an important milestone for Medeira, and one our team should be proud of. We marked it with a move into our new home office in Rosemont, Illinois. It is a place that is ours, and it has helped us define who we are as Medeira. but ultimately, a building does not make a company. People do. I want to thank our entire team for their commitment, energy and individual contributions. Our results-driven entrepreneurial culture is what makes Nidera special and it is what will drive our success going forward. Last quarter, I told you I had never seen this team more energized or more aligned around where we are headed. This quarter, that energy and focus showed up in our results. I'm once again pleased the team exceeded our expectations and delivered a great quarter. Net sales of $228.9 million grew 13% with organic growth of 12%. adjusted EBITDA of 42.9 million grew 45% and a margin of 18.7% expanded approximately 410 basis points relative to an estimated standalone adjusted EBITDA in the prior year. orders grew approximately 13% versus a year ago to $229 million, and our backlog of $446 million is up 26% over that same period. On today's call, I'll take you through some key highlights of the quarter against the four pillars we laid out at our investor day in May, total line solutions, Market Penetration, After Market, and Acquisitions. Then I'll hand it over to Amy for the financial review and we will take your questions. Before I get into the pillars, I want to take a moment for those who are newer to our story to describe who Midera is and what we do. We believe we are the largest pure plate further food processing company. Nidera operates at the highest value, most mission critical parts of our customers' production lines where automation, differentiated technology, reliability and system integration matter most. We design, integrate, commission and support total line solutions, complete production lines for protein, bakery and snack producers, from preparation, portioning, and thermal processing through slicing, packaging, and facility automation. Our portfolio of more than 30 industry-leading brands, our installed base of more than 100,000 units, and our approximately 2,900 team members serve customers on six continents. Our customers depend on our equipment every day to produce some of the most widely consumed foods in the world and they choose me thereupon because we help them improve yield, efficiency, food safety, and labor productivity. Every decision we make begins with a customer and that discipline anchors how we operate as an independent public company. With that, Let me start with total line solutions, which is the central pillar of our operating strategy. When we sell the line instead of a machine, we own the outcome. And increasingly, customers are moving towards having NEDERA integrate the complete line rather than integrating it themselves. Last quarter, I talked about our first major total line solution with newly acquired Frigo Mechanica in the shaft-to-tree category. This quarter, we won one of the largest charcuterie projects in Italy for a leading Italian producer. Winning a project of this scale in a category so central to Italian food culture says a lot about our position. That customer is Salumi Ficcio Coatti, which is building a new dry-cured meat facility in northern Italy. Coati selected Medeira as its single technology partner for the further processing part, bringing together four of our brands, and the line was conceived at our new innovation center. They chose Medeira for the design of the line, which we anticipate will deliver a lower total cost of ownership and greater product uniformity, and for our ability to manage the entire project from bringing together the right expertise to commissioning the line. In bakery, we want a large bun line in the U.S. for a leading U.S. grocery retailer. And in snack, we want a complete tortilla chip line in India. These are just three examples and they fit a pattern. Each one is a line where we own the outcome, and we create a custom relationship that lasts for the life of that line through the service that follows. We are winning projects across multiple categories and geographies, and our pipeline suggests this will continue. Our second pillar is market penetration, and the headline this quarter was that demand continued to be broad-based. on a year-to-date basis, we grew across all of our categories and across geographies in North America and even more significantly in the rest of the world. That is by design. Every company in our industry has its own angle. Ours is agnostic to the end product and squarely focused on further processing, which is where we believe value is created to the customer. Our advantage is not tied to any one food category. It comes from innovative precision engineered technology, deep process expertise, and strong material know-how that we can apply whether a customer is producing bacon, chicken, bread, or tortillas. Category ebb and flow, so diversification across them gives us a greater resilience allows us to capitalize on growth whenever it occurs and wherever, and ultimately drives more consistent, durable growth over time. That includes the Middle East. It has been a difficult period for the region, yet our customers there continue to invest in their operations, and we continue to win business with them. I had the pleasure of attending Gulf Food Manufacturing one of the world's leading food and beverage sourcing events that took place earlier this month in Dubai, where we showed customers from across the region, including those from growing markets like Turkey and Pakistan, what our innovation can do for their lives. These are markets with growing populations to feed, and we had an exceptional show that speaks to the shifting needs of today's food manufacturers. taking a look at a few wins in the quarter. I will start with portable protein snacks. Alcar, a leader in continuous thermal processing systems for protein located in Wisconsin, had a particularly strong quarter as the consumption of portable protein continues to grow, driving demand for cooked, ready-to-eat protein snacks. In poultry, our customers continue to invest to meet demand, Reduce cost and make more value-added product. That is where our newest acquisition, Phoenix Innovations, fits and I'll come back to that. In bakery, growth accelerated in the quarter. The world loves bread and sourdough and long fermentation format continue to be a bright spot. In snack, We told you last quarter that the equipment shipments delayed by a third party vendor were a matter of timing. As expected, these units shipped in the third quarter, contributing to snack becoming our fastest growing category in the quarter. Beyond the timing impact, we continue to see strong demands from our customers in this space. Every time a customer reformulates or launches a new format, They need different equipment and that's the moment they call us. And that is the real point. Customers are working hard to protect their margins. We don't just win because we sell a better machine. We win because we help them make more product with less waste and less labor and with the payback they can see. Whether they serve the premium end of the market or the value end, That is a conversation every customer wants to have. Our third pillar is aftermarket, and it continues to be a consistent revenue stream, as we discussed at our investor day, represents a compelling opportunity for growth. Aftermarket sales grew approximately 16%, including double-digit organic growth, and represented 42% of net sales in the quarter. Growth came across all three subcategories, parts, service, and modernization projects, driven by higher demand, share capture, and pricing actions that have been taken over the last year. Last quarter, I talked about the importance of delivering for our customers to ensure maximum uptime. I'm proud of our team for continuing to support our customers every day. How we answer their call is what earns us the next order, and you can see it in these results. And the more we install, the stronger this gets. Every line and every machine we put in the field adds to the installed base our service team support for the life of that equipment. During the quarter, we made further investments in our service organization adding technicians to expand our customer support capabilities. We are also advancing our connected equipment solutions with a focus on predictive maintenance and increasing equipment uptime. We see uptime and proactive service as key competitive advantages that deepen customer relationships, differentiate our offering, and create opportunities for continued aftermarket growth. Our fourth pillar is acquisitions, and in October, we completed our first as a standalone company, Phoenix Innovations. Phoenix is based in Russellville, Arkansas, which is strategically located in the heart of many poultry processing plants. It designs and manufactures needle injection, marination, tumbling, and thermal processing solutions with a focus on poultry and has an annual revenue run rate of approximately $25 million. That is exactly the kind of deal we described at our investor day. Adding the capability where buying it is faster and more capital efficient than building it from scratch. Phoenix expands our offerings of complete further processing poultry line, supporting our total line solution strategy, and adds an installed base for our aftermarket team to serve. Phoenix is a founder-led business, and its team lives and breathes poultry processing. The team will continue to lead the business, and the Phoenix name stays on the door. for what they spend years building, we take that seriously and we are excited to extend our global reach to them. Acquisition timing is difficult to predict, but it's a perpetual process for us. Our pipeline remains active and we are continuously looking for the next business that fits our strategy and our culture. We underwrite every deal to target double-digit ROIC by year three, and with net leverage of 1.2 times, we have significant capacity to keep executing. Let me finish with profitability, because it was a highlight of the quarter, with adjusted EBITDA margin expanding to 18.7%, up 410 basis points relative to estimated standalone adjusted EBITDA in the prior year. This was also 170 basis points higher than the margin we reported in Q2 on an estimated standalone adjusted basis. This reflects a healthier backlog, the operating efficiencies our team are driving, and lapping prior year tariff pressure. Longer term, we believe the opportunity to drive margin expansion using the MEDeAIR operating system framework is compelling. The biggest levers we are focused on are material costs and supply chain management, logistics, purchasing power, low-cost sourcing, and make-or-buy decisions. And we continue to believe that we are in the early innings. Fundamental to our operating system is our culture. We empower our world-class team because we believe the best team wins. We continue to advance visual management across the organization using a consistent SQD-CNG framework. That is safety, quality, delivery, cost and growth to drive faster, more informed decision making and greater accountability. Combined with a lean toolkit and the aggressive deployment of technology across our manufacturing operations, These initiatives are improving productivity and execution. Importantly, we see a clear path for these efforts to contribute to sustainable margin expansion over time. With that, I'll turn it over to Amy for a detailed financial review.
Amy Campbell
Chief Financial Officer
Thank you, Mark, and good morning, everyone. Today I'll cover our third quarter results, followed by a review of our balance sheet, as well as our outlook for the fiscal quarter. Before I begin, I want to reiterate Rob's comments about the presentation of results. Madera's separation from Middleby was completed on July 6th at the start of the third quarter. Therefore, our third quarter results are on a standalone public company basis, while results for the first six months of 2026 and prior year results are presented on a carve-out basis. Where we refer to the non-GAAP measure, estimated standalone adjusted EBITDA, that measure reflects management's view of profitability fully burdened by our estimated stand-alone public company cost, which are not reflected in Middleby's historical segment reporting and are not fully captured in the carve-out financial statements on a like-for-like basis. I also want to point out, to avoid any confusion, that in the quarter we revised the definition of acquisition-related adjustments in the calculation of adjusted EBITDA to include third-party transaction costs related to M&A transactions, which we believe to be outside core operating results. All materials filed today reflect this definition change for all periods. This change in definition does not change estimated standalone adjusted EBITDA for historical periods as previously disclosed. With those administrative details out of the way, let's cover the quarter. Third quarter net sales grew 13% to $229 million. Organic net sale growth was 12%, which excludes the impact of acquisitions and foreign exchange rates. The impact of foreign exchange was negligible. Inorganic sales contributed 2% to top line growth, reflecting the contribution from our Frigo Mechanica and OCA acquisitions prior to the anniversary of those deals closing in the third quarter of last year. From an organic perspective, growth was driven by strong aftermarket parts and service, which grew across the installed base, and higher equipment sales that were broad-based across categories, including the impact of the SNAC category shipments that were delayed from the second quarter. Geographically, we saw 30% growth outside the United States and Canada versus the prior year period with particular strength in Europe. Investment priorities continue to vary by region. In Europe, customer spending is weighted toward automation that addresses labor constraints and improves energy efficiency. In the U.S., the emphasis is more on increasing yield and throughput. Across both regions, customers remain disciplined in their capital allocation with spending focused on projects that offer a clear and relatively near-term payback. Aftermarket Parts and Service represented 42% of net sales in the quarter and 41% on a trailing 12-month basis as of the end of the third quarter. Aftermarket Parts and Service provides steady recurring revenue from a large installed base, and as Mark mentioned, we continue to invest to further accelerate growth. Adjusted EBITDA was $42.9 million. The 45% increase in adjusted EBITDA relative to estimated standalone adjusted EBITDA in the prior year was driven primarily by higher sales of aftermarket parts and service, higher equipment sales, improved pricing, and improved operating efficiencies, partially offset by the impact of cost inflation. Adjusted EBITDA margin was 18.7% compared to 14.6% in the prior year period on an estimated standalone adjusted basis. The 410 basis point year-over-year increase in margin percentage primarily reflects improved operating leverage on higher equipment and aftermarket sales, operating efficiencies and price actions partially offset by cost inflation. Operating efficiencies benefited significantly in the quarter from a much healthier backlog than where we started the comparable quarter last year. A strong backlog impacts how you run the business from commercial decisions to improve planning and manufacturing operations and is a significant part of the margin growth story this quarter. The third quarter has now largely lapped the prior year tariff pressure that weighed on margins. We did recognize a small amount of tariff refunds in the quarter, impacting margins by approximately 30 basis points. To address inflation, we continue to price contracts against expected costs, lock supplier contracts where we can on large projects, and at mid-year, we took additional pricing actions on aftermarket parts. Now, shifting to results on a year-to-date basis. As a reminder, we believe it is important to evaluate Madeira's performance over a number of quarters and not in a specific quarter, given the value of our equipment and the reality that shipments can pull forward or Slip for any number of reasons, including customer needs. Therefore, we discourage drawing conclusions and trends from the results of any single quarter, but instead look at the business over time. And the last nine months' results reflect a business that continues to be very healthy. Net sales were $699 million through the first nine months of the year, an increase of 19% compared to the prior year period. with organic net sales growth of 12%. Higher year-to-date sales have been a result of strong demand across all categories as customers invest to drive returns in their businesses and meet changing consumer preferences. Year-to-date estimated standalone adjusted EBITDA grew 32% to $118 million and margin expanded by approximately 170 basis points year-over-year to 16.9%. This performance was primarily driven by higher equipment and aftermarket sales, partially offset by inflationary costs. With 170 basis points of margin improvement year to date, we are tracking as expected toward the 2028 margin targets we laid out at our investor day in May. Orders in the quarter were $229 million of approximately 13% from the prior year. including approximately 11% organic growth. Backlog ended the quarter at $446 million, up approximately 26% year over year, all of which was organic. And backlog is at the end of the quarter gives us a visibility to over 90% of our fourth quarter equipment sales assumed in the guidance we provided today. Book to bill was 1.0 times in the quarter, consistent with the third quarter of last year. Book-to-bill was 1.1 times for the trailing 12-month period through the third quarter. This is a reflection of continued, strong, broad-based demand and the willingness of our customers to invest where there is a quantifiable return. Free cash flow for the quarter was approximately $9 million, below our expectations, primarily reflecting the timing of certain receivable collections around quarter end. Those receivables have since been collected, reinforcing our view that this was largely a timing issue rather than a change in the underlying cash generation of the business. We remain focused on disciplined working capital management and continue to expect annual free cash flow conversion above 50% of adjusted EBITDA when we transition to a full year of financial results on a reported standalone basis. We ended the quarter with cash of $49 million and total debt of $249 million for net debt of approximately $200 million. Net leverage was 1.2 times based on LTM estimated standalone adjusted EBITDA, and we ended the quarter with $829 million of liquidity, which includes cash and cash equivalents, along with $780 million of availability under the revolving credit facility. Our capital structure is deliberately simple. It was designed to support growth and our capital allocation priorities, which are unchanged from our investor day. First, organic reinvestment to protect and grow what we have. Second, disciplined, return-driven acquisitions. And third, we manage all of it within a net leverage framework of below 3.0 times. Capital expenditures were $10.7 million for the first nine months of 2026, compared to $35.2 million during the first nine months of 2025. Capital expenditures in the first nine months of 2026 were primarily for upgrades of production equipment and manufacturing facilities to drive operating efficiencies. Capital expenditures for the prior year period included significant investments for our Innovation Center in Italy, and the purchase of a previously leased building in Texas. During the third quarter, we repurchased 14,700 shares for approximately $600,000 under our $50 million share repurchase program. To date, we have repurchased approximately 59,000 shares for approximately $2.5 million and have $47.5 million of remaining authorization. Our share repurchase program is primarily intended to mitigate stockholder dilution from equity grants.
Ian Ciccino
Analyst, Oppenheimer
Turning to our outlook.
Amy Campbell
Chief Financial Officer
Given our strong performance and including the expected contribution from Phoenix, we are updating our full year 2026 guidance to reflect an increase in the midpoints of expected ranges for net sales and estimated standalone adjusted EBITDA. At the midpoint, The revised guidance represents an increase of $13 million in net sales and $5 million in estimated standalone adjusted EBITDA versus our prior guidance. While there are puts and takes, the raise to the guide essentially passes on the organic beat in the quarter and adds our expectations for Phoenix, which will be a part of our portfolio for about two months of 2026. We continue to take a disciplined approach as to how we deliver guidance to investors. For the full year 2026, we expect net sales in the range of $953 to $973 million and estimated standalone adjusted EBITDA in the range of $168 to $178 million. At the midpoint, that implies expected organic sales growth of 7% and estimated standalone adjusted EBITDA margin expansion of approximately 160 basis points versus 2025. Our guidance reflects the health of the equipment backlog, strong aftermarket parts and service growth, and improved operating efficiencies. In lieu of an adjusted earnings per share estimate, we are providing additional modeling assumptions including depreciation and amortization, stock-based compensation, interest expense, and weighted average diluted shares outstanding. These are all detailed in our press release that was issued this morning. The fourth quarter is typically our strongest for both net sales and adjusted EBITDA as customers focus on getting capital projects delivered before their fiscal year ends, and we anticipate the seasonality again this year. We also expect margin to improve sequentially on improving mix in the backlog, improved pricing, absorption of fixed costs on higher sales, and realization of benefits from the Madera operating system. Before I turn it back to Mark, I do want to call your attention to a fourth quarter fiscal calendar-related headwind that impacts organic sales growth versus the prior year. Fiscal 2025 included a 14th week in the fourth quarter under our 4-4-5 fiscal calendar, a situation that happens every five to six years. This additional week in the prior year period creates a slightly more difficult year-over-year comparison as the duration of the prior year period was approximately 7% longer. With that, I'll turn it back to Mark.
Mark Salman
Chief Executive Officer
Thank you, Amy. Before we take questions, let me pull the key takeaways together. Our first full quarter as a standalone company delivered what we said it would. We delivered strong profitability with margin up 410 basis points on an estimated standalone adjusted basis. Demand is broad-based across our categories and geographies, reflected in strong order books and backlog as we look to 2027. We are not dependent on any one category or any one region, and that balance is a strength. That growth is structural, not cyclical. Rising protein consumption, dietary shifts, labor scarcity, and Food Safety and Security all make our equipment the preferred solutions for customers. This spending is need-based, not discretionary. The margin story from here is largely in our control. It comes from innovation, growth, absorption, acquisitions maturing to our platform margins and their operating system, powered by our people and the culture they have built. And we are playing offense. Phoenix is our first acquisition as a standalone company, and our pipeline remains active. In a fragmented $70 billion market, the acquirer of choice becomes the compounder of choice. We intend to be both, and we intend to keep earning that distinction. We are committed to generating a return on your time and on your investment. With that, operator, please open the line for questions.
Conference Operator
Operator
As a reminder, if you'd like to ask a question at this time, please press star 11 on your touch-tone phone and wait for your name to be announced. To withdraw your question, please press star 11 again. Our first question comes from Justin Aches with CJS Securities.
Justin Aches
Analyst, CJS Securities
Hi, morning all. Good morning. You know, pretty good results. I wanted to ask about total line solutions. Can you give us any more color? I know you called out three wins, but can you give us a sense of what percentage they are of orders or what percentage they are of equipment sales?
Mark Salman
Chief Executive Officer
Yeah, Justin, good morning. So we do not share the specifics on total line solution. However, what I can share with you is it continues to be a strong growth driver of our revenue. I can give you some data points. I mentioned I was in Dubai earlier this month. We closed several total line solutions in the bread category. We talked about Coati in the earning release on the Charcuterie. Across all three end products in snags, we continue to see a lot of demand on corn chips full line solution. But it is definitely one growth driver that is proving to be a winner for us.
Justin Aches
Analyst, CJS Securities
Okay, thank you for that. And then switching to guidance and the CapEx guidance, you know, based on my math, it seems like it's implying a pretty big step up in fourth Q CapEx to get in that two to two and a half percent range. Can you talk about, you know, what you guys are investing in? Is it, you know, further the innovation centers or is it something else?
Amy Campbell
Chief Financial Officer
Yes. No, Justin, just to clarify, we didn't provide CapEx guidance for the full year. The two to two and a half percent of sales, I'd really say is over time what we expect CapEx to be. That said, we do expect CapEx to increase in the fourth quarter. And I'll turn it over to Mark Bowie, our COO, to talk about where we're making those investments in the fourth quarter.
Mark Bowie
Chief Operating Officer
Hey, Justin. You know, from a CapEx perspective, I mean, obviously we want to make the right investments and be super efficient. Smart with how we deploy that incredibly impactful resource for us. And where we really try to do that in a meaningful way is looking at our operations and making investments around technology that support our ability to serve our customers and compete on the cost front in a meaningful way. So we've got a lot of investments that are in flight today. that will improve our manufacturing operations from a cost perspective. And really, we'll see that on the productivity front, and that's one of the multiple pillars that we have that gives us confidence around our margin expansion story going forward. So we do believe Q4 will be strong in where those investments lie, and we will continue to reap the rewards for those investments for years to come. All right, thank you for taking the questions.
Conference Operator
Operator
Thank you, Justin. Our next question comes from Mig Dobre with Baird.
Peter Calamari
Analyst, Baird (on behalf of Mig Dobre)
Hey, guys, this is Peter Calamari, and I'm from Mig this morning. Thank you for taking my question. I want to start with one on margin. You know, implied fourth quarter margin is in, you know, call it just shy of 21%. How much of that step-up reflects structural operating improvements or a catch-up on price-cost versus seasonal volume or shipment mix? And is a margin, you know, there is some normal seasonality from 4Q to first quarter, but is a margin in that 20-ish percent range a reasonable run rate to think about into the start of next year? Any color on that would be appreciated.
Amy Campbell
Chief Financial Officer
No, thanks, Pete. I'll take that. So, you know, if you look at that step-up of margin, you know, implied at the midpoint, it's about 200 bits from the third quarter. Certainly not unprecedented. In fact, it's half of the step-up and margin accretion we had from the third quarter to the fourth quarter last year where we saw 400-bit margin improvement. So we do tend to see that fourth quarter historically have the highest EBITDA margin percent of the quarters. It does come from, and I'm going to talk about from a sequential basis, it certainly comes from better fixed cost leverage on higher sales. Sales are up 15% implied at the midpoint versus the third quarter. The backlog does continue to get healthier from a price-cost perspective, which allows us to run our plants much more efficiently. And then we have started and further expect to see the benefits from the Madera operating system, and in fact, some of these CapEx projects that we were spending in the third quarter. So it is both, I would say, fixed cost leverage on higher costs, the highest cost with the fourth quarter being our highest sales quarter, and then operating leverage, healthier backlog coming through, which is certainly sustainable as we move into 2027. not going to provide 2027 guidance, certainly not going to provide quarterly guidance at this time into 2027. That said, I would expect margins to step back in the first quarter from what we deliver in the fourth quarter. That's seasonally what we see happen. I wouldn't expect that not to be the case for 2027. You know, and I would expect us for the full year 2027 to continue on the trajectory towards the 2028 margin targets we laid out back in May.
Peter Calamari
Analyst, Baird (on behalf of Mig Dobre)
Got it. Thanks for the color, Amy. I guess on pricing, the announced price increase, how has customer acceptance been to these price increases? And we're halfway through the fourth quarter now. Are you seeing any impact on order conversion or competitive win rates? Anything to call out there? And then second piece of the question, is there a way to quantify that cost inflation headwind that we saw this quarter and and when do you expect to achieve full price cost neutrality given the timing of shipments out of backlog? Is that something that's in the 4Q guide or is that a first half of 27 story?
Mark Salman
Chief Executive Officer
All right, I'll take a pass at the first part of your question. We're in the business to deliver solutions that makes money to our customers. And therefore, when the ROI is there, the pricing becomes a secondary and others. So it is true we did take a pricing adjustment on aftermarket to mitigate some of the inflation pressure that we've seen, but our equipment, our bespoke, we cost each line at that time with the data that we have, and we're able to mitigate some of the inflation by really buying forward some of our key material on these lines. But at the end of the day, you should look at our edge, you know, the innovation edge is that we allow our customers to produce great food in an affordable fashion, and therefore pricing becomes a secondary discussion.
Amy Campbell
Chief Financial Officer
And on the second half of that question, Pete, which I think was when do we reach full cost price neutrality. What I would say there is if you think back a year ago in the second half of 2025 where, you know, we had tariff pressures on margins that came from, you know, actually really several different operational commercial issues, you know, we believe as we entered the second half of 2026 that that Those headwinds that drove margin pressure in the backlog are behind us at this point. So we're now addressing inflation, pricing projects with known inflation. Things have settled down certainly from where we were a year ago this time. That said, inflation certainly continues. And so we will continue to track inflation, to take price increases as necessary. I don't see in the midterm that we're going to stop having to stay on top of inflationary pressures, be they from fuel costs, be they from materials costs, whatnot. That's going to be a continuing focus of the teams.
Justin Aches
Analyst, CJS Securities
Got it. Thanks for the call, guys.
Conference Operator
Operator
Thanks, Pete. Our next question comes from Ian Ciccino with Oppenheimer.
Ian Ciccino
Analyst, Oppenheimer
I agree. Thank you very much. Would you be able to give us the, either for the past quarter or maybe in the guide or maybe how that's changing, you know, price versus volume? You know, so what would be that split for last quarter and then in the guide or any acceleration in pricing or how do we think about that going forward? Thanks.
Amy Campbell
Chief Financial Officer
Yeah, Ian. We don't break out price versus volume. It's in fact very difficult for us to do given the bespoke nature, the one-off nature of our sales specifically. So we don't break that out. We have disclosed that mid-year we took, it differed by brand, but on the average about a mid-single digit price increase on parts. Now certainly a lot of that was to offset the inflationary headwinds that we see out there. So I think that math is pretty easy to do. But outside of that, every one of these projects is priced individually. They tend to be very unique projects, and so breaking out price volume is just a very difficult thing to do, and we don't have that data to disclose, certainly at this time.
Ian Ciccino
Analyst, Oppenheimer
Okay. maybe as far as the margin improvement, would you be able to maybe bucket it as far as how much is it mixed between aftermarket, how much would it be volumes, and how much is it kind of recovering price versus cost?
Amy Campbell
Chief Financial Officer
Yeah, I think, as I said, it's difficult to break out volumes versus price, so it's difficult for me to put that in exact buckets. But I think if you divided it, frankly, up a third, a third, a third, We wouldn't be too far off from what drove the margin improvement.
Ian Ciccino
Analyst, Oppenheimer
Okay, thank you very much.
Conference Operator
Operator
As a reminder, if you'd like to ask a question at this time, please press star 11 on your touch tone phone. Our next question comes from Ross Sparenbleck with William Blair.
Sam
Analyst, William Blair
Hey, good morning. This is Sam . Thanks for taking my questions. As we head into 2026, I'm curious what you're hearing from customers on the 2027 project pipelines. Are there any areas where you're seeing more project activity? And how does initial project quoting activity compare to what you saw kind of 12 months ago?
Mark Salman
Chief Executive Officer
So, Sam, we feel strong about 2027. Our sales pipeline continues to grow. We see different dynamic On the value product, we're seeing continuous investment in automation and yield improvement, waste reduction, that type of investment that really brings a good ROI. On the value product, we see a continuous investment in the premium end of the product that really necessitates further investment and equipment. I was listening to an earning call yesterday from a large protein processor. Interesting enough, they called the year 2027 slightly down on their revenue, but their capex increased by close to 60-70% in terms of expectation for capex deployment. So our customers have to invest to protect their margin and grow their stop line. And that's what NIDERA is able to offer them, especially on the total line solutions.
Sam
Analyst, William Blair
Got it. That's super helpful. I guess switching gears, just to get a better sense of Phoenix's financial profile, can you share the purchase price for that asset and then kind of give us some color on what the margin profile, historical organic growth, and kind of aftermarket mix looks like?
Mark Salman
Chief Executive Officer
Yeah. No, I'll just say one thing. No, we never disclose purchase price per se, but I can tell you that team with Nate and Luke at the leadership, the whole team at Phoenix Innovations, it's an incredible acquisition. We're so proud that they decided to join our family. But I'll let maybe Amy put more color on your question.
Amy Campbell
Chief Financial Officer
Yeah, I think if you look at that acquisition, we're super excited about it. It's a great team, as Mark said. You know, the financial profile of Phoenix, we talked about kind of expected annual run rate of sales of about $25 million, well within the financial targets that we laid out in Investor Day. We expect to be a double-digit ROIC by year three. You know, we cut the purchase price multiple in half in over three years. A lot of opportunities to grow that business, especially as it integrates in poultry total line solutions with our other projects. It has a good EBITDA margin, but one that we think we can continue to grow. So, you know, I think overall it's a solid, coming in day one, a solid Add to the portfolio and we expect it to improve over the next two to three years and be delivering the same type of EBITDA margins we see across the business.
Mark Bowie
Chief Operating Officer
Yeah, and culturally, just to touch on aftermarket a little bit, culturally the Phoenix team is absolutely laser focused on supporting their equipment in the field. The origins of the business actually revolve around improved aftermarket parts and supporting their customers in a meaningful way to bring that value to them. That fits our culture perfectly. And as that business is on this pretty aggressive growth curve that it's been on for the last couple years, Their installed base continues to grow. Their aftermarket will drag along with that because of the age and the lifespan of the equipment. So we're very bullish on the opportunities there, particularly when you plug them into our total line solutions. It's just a perfect fit for what we're looking for in the Medera model.
Sam
Analyst, William Blair
Got it. That's all super helpful. I will leave it there.
Conference Operator
Operator
Thanks.
Mark Bowie
Chief Operating Officer
Thanks, Sam.
Conference Operator
Operator
That concludes today's question and answer session. This will conclude today's conference call. Thank you for participating. You may now disconnect.