WHD Cactus, Inc.

NYSE
$65.49

Cactus, Inc. Q3 F2026 Earnings Call Transcript

AI Conference Call Analysis

Sign in or subscribe to read.
Operator
Conference Call Operator
Good day, and thank you for standing by. Welcome to CACTUS Q3 2026 Earnings Call. At this time, all participants are in a listen-only mode. After the speaker's presentation, there will be a question and answer session. To ask a question during the session, you will need to press star 1 1 on your telephone, and you will then hear an automated message advising your hand is raised. To withdraw your question, press star 1 1 again. Please be advised that today's conference call is being recorded. I would now like to hand the conference over to your first speaker today, Alan Boyd, Treasurer and Director of Corporate Development and Investor Relations. Please go ahead.
Alan Boyd
Treasurer and Director of Corporate Development and Investor Relations
Thank you, and good morning. We appreciate you joining us on today's call. Our speakers will be Scott Bender, our Chairman and Chief Executive Officer, and Jay Nutt, our Chief Financial Officer. Also joining us today are Joel Bender, President, Steven Bender, Chief Operating Officer, and CEO of Spoolable Technologies, Steve Tadlock, CEO of Cactus International, and Will Marsh, our General Counsel. Please note that any comments we make on today's call regarding projections or expectations for future events are forward-looking statements covered by the Private Securities Litigation Reform Act. Forward-looking statements are subject to a number of risks and uncertainties, many of which are beyond our control. These risks and uncertainties can cause actual results to differ materially from our current expectations. We advise listeners to review our earnings release and the risk factors discussed in our filings with the SEC. Any forward-looking statements we make today are only as of today's date, and we undertake no obligation to publicly update or review any forward-looking statements. In addition, during today's call, we will reference certain non-GAAP financial measures. Reconciliations of these non-GAAP measures to the most directly comparable GAAP measures are included in our earnings release. With that, I'll turn the call over to Scott.
Scott Bender
Chairman and Chief Executive Officer
Thanks, Alan, and good morning, everyone. Pressure control sales declined as expected, but bookings accelerated and margins exceeded expectations on improved cost control, synergy realization, and strong domestic performance. Our spoolable technology business grew sales and backlog substantially as international and domestic market momentum continued. Although the global market remains highly dynamic and uncertain, I'm confident that our business, which focuses on differentiated, highly engineered products, will continue to outperform. Some third quarter total company financial highlights include revenue of $431 million, adjusted EBITDA of $132 million, adjusted EBITDA margins of 30.6%, we close the quarter with a cash balance of $354 million, and paid a quarterly dividend of 15 cents per share. Yesterday, we announced that we're planning to construct a spoolable technologies manufacturing facility in the Mideast. And I'll turn the call over to Jay Nutt, our CFO, who will review our financial results. And following his remarks, I'll provide some thoughts on our outlook for the near term before opening the lines for Q&A. Jay?
Jay Nutt
Chief Financial Officer
Thank you, Scott. As Scott noted, total Q3 revenues were $431 million, down 4% sequentially. Total adjusted EBITDA of $132 million was flat from the second quarter despite the lower volume and lower contributions from tariff refunds. For our pressure control segment, revenues of $305 million were down 11% sequentially, driven primarily by lower product shipments in the Middle East. which more than offset an increase in U.S. sales as domestic customers increased activity. Operating income increased $2.4 million or 4% sequentially with operating margins increasing approximately 3%. Operating income was reduced by approximately $9 million due to purchase price accounting adjustments that we add back to our adjusted operating results which declined from $20 million in the second quarter. Adjusted segment EBITDA was $9.8 million, or 10% lower sequentially, with margins increasing by 40 basis points. Margins improved slightly on better mix and strength in spares and repair margins in our Cactus International business, combined with strong cost control and synergy realization, all of which offset lower operating leverage and lower tariff refunds in the quarter. Our refunds total approximately $6 million in the quarter, and we've received the vast majority of the refunds that we anticipate are due. For our spoolable technology segment, revenues of $127 million increased over 20% sequentially, reflecting expanding domestic activity in a seasonally stronger quarter and continued expansion in international markets. Operating income increased $9.4 million or 29% sequentially with operating margins increasing 230 basis points. Adjusted segment EBITDA increased $9.8 million or 23% sequentially while margins increased by 110 basis points as operating leverage improved. Corporate and other expenses increased by $1.3 million to $9.1 million in Q3 including $600,000 of transaction and integration cost. Adjusted corporate EBITDA moved unfavorably from 5.3 million to 6.1 million of expense on higher personnel expenses. On a total company basis, third quarter adjusted EBITDA was $132 million, down $800,000 from Q2. Adjusted EBITDA margin for the third quarter improved to 30.6% compared to 29.5% for the second quarter. Adjustments to total company EBITDA during the third quarter included non-cash charges of $7.8 million in stock-based compensation, $200,000 of inventory step-up amortization reversal due to purchase price accounting, and $600,000 for transaction-related professional fees, and $2.8 million of severance primarily associated with continuing actions to right-size the Cactus International organization in support of our previously communicated synergy target. Total company backlog ended the quarter at $615.6 million, an increase of approximately $160 million from the end of the second quarter. Backlog in Cactus International business increased sequentially as anticipated as certain customers had destocked inventory in the first half of the year and commenced order placements. Backlog in our spoolable business expanded meaningfully in the third quarter, primarily driven by continued order strength in the LATAM market. As a reminder, backlog does not include any U.S. pressure control contribution. Depreciation and amortization expense for the third quarter was $26.8 million, which included $200,000 of amortization reversal of the step up in inventory values resulting from the Cactus International acquisition, and a combined $13.6 million of amortization expense related to intangible assets that arose from both the Cactus International and Flex Steel acquisitions. During the third quarter, the public or Class A ownership of the company averaged and ended the period at 87%. GAAP net income was $74 million in the third quarter versus $61 million during the second quarter. The increase was largely driven by lower purchase price accounting-related adjustments in the period. Book tax expense during the third quarter was $21 million, resulting in an effective tax rate of 22%. Adjusted net income and earnings per share were $78 million and 96 cents per share, respectively, during the third quarter, compared to $75 million and 93 cents per share in the second quarter. Adjusted net income for the third quarter was net of a 27% tax rate applied to our adjusted pre-tax income. During the quarter, we paid a quarterly dividend of 15 cents per share, resulting in a cash outflow of approximately $12 million, including related distributions to our members. We ended the quarter with a cash balance of $354 million. This amount is net of $91 million of cash dispersed through accounts payable to finalize the Cactus International legal entity formation transactions with Baker Hughes during the quarter. We've now concluded all legal entity formations and deferred closing activities related to the Cactus International acquisition. The quarter and cash balance represented a sequential increase of $79 million, excluding the transaction-related outflows in the period. Net Cap Ex was $16.1 million during the third quarter of 2026. In a moment, Scott will give you our fourth quarter operational outlook. Some additional financial considerations when looking ahead to the fourth quarter include an effective tax rate of 24% and an estimated tax rate for adjusted EPS of approximately 27%. Total depreciation and amortization expense during the fourth quarter is expected to be approximately $27 million. $18 million of the amortization expense is associated with our pressure control segment and $9 million is in the spoolable technology segment. These amounts include approximately $10 million of intangible amortization due to purchase price accounting in our pressure control segment and $4 million in our spoolable technology segment. We now expect our full year 2026 net CapEx to be approximately $65 million. The estimate includes the placement of orders for long lead equipment related to the Middle East Spoolable Technologies Manufacturing Facility and the ongoing Baytown expansion. Scott will describe the Middle East Plant Initiative in more detail in just a moment. During the fourth quarter, we'll be making the annual payment related to our tax receivable agreement and related member distributions. The payment and related distributions will be approximately $25 million. Finally, the Board has approved a quarterly dividend of 15 cents per share, which will be paid in December. That covers the financial review, and I'll now turn the call back over to Scott.
Scott Bender
Chairman and Chief Executive Officer
Thanks, Jay. I'd like to begin our Outlook commentary with an overview of our plan to expand our spoolable technologies manufacturing footprint with a facility in the Mideast. There is a substantial market opportunity in the region, as the Mideast offers one of the largest potential markets for spillable pipe where steel pipe currently dominates. Flex Steel has been successful in cultivating relationships with key customers in the region. While we have had recent success in winning awards, this market remains essentially untapped for us right now, representing only about 2% of revenue since we acquired the business. In order to drive a step change in our sales in the Mideast, a local manufacturing presence is needed. We expect that the investment required to construct the facility will be approximately 100 million, which we anticipate being funded with internal cash generation. The majority of the capital investment will be split between 2027 and 2028 with a modest amount to be incurred in 2026, as Jay mentioned. We expect that the plant will commence operations in 2029. We provided an indication of our potential long-term revenue impact last quarter and will provide further details regarding the facility as construction progresses. I will remind you that our Flexsteel product offers customers the largest commercial spoolable pipe diameters, pressure ratings, temperature ratings to meet the wide range of customer needs, and many of our products are already fully qualified by the key customers in the region, providing confidence and our ability to penetrate the market. We're enthusiastic about taking this next step in the evolution of growth for Flex Steel. I'll now turn to our operational outlook for the fourth quarter. During the fourth quarter, we expect pressure control revenue to be flat to up from the third quarter. We expect the domestic U.S. land recounts will remain steady from today's level through the end of the year, which represents a slightly higher average activity level than seen in the third quarter and should result and others. Our manufacturing operations in the Mideast have been largely uninterrupted despite the ongoing conflict and increased tensions and we continue to monitor the situation including the impacts of the recent Hootie activity. Adjusted EBITDA margins in our pressure control segment are expected to be in the 23% to 25% range in the fourth quarter. This guidance excludes approximately $4 million of stock-based comp expense within the segment. Margins are expected to decrease primarily due to the non-recurrence of tariff recovery and will also be unfavorably impacted by customer mix in our Cactus International business. Looking forward with the increase of pace of order activity and our Cactus International business in the back half of this year, we expect revenue levels for next year to be broadly flat with 2026, with the back half of 2027 being stronger than the first half. With these orders, our work is accelerating on supply chain related transformation and the associated cost savings we expect to achieve in the back half of 2027, which will which will more fully benefit 2028 results. We'll share more detail on these initiatives in the coming quarters. We also remain encouraged by efforts to diversify sales into regions with a large install base of legacy Vetco Gray equipment which we expect to benefit our revenues in 2028. As it relates to our U.S. operations, the tariff situation has remained stable in the past several months and we continue to pay approximately 75% total tariffs on the import of most of our goods from China. Shifting to our spoolable technology segment, I remain very pleased with the performance of this business. We expect revenues in the fourth quarter to be up low single digits from the third quarter as typical North American market seasonality is more than offset by continued international strength benefiting from the timing of several large shipments into Latin America in the fourth quarter. We expect non-US sales to represent approximately 20% of sales for 2026, more than doubling from sub 10% in 2025. As we previewed on last quarter's call, we achieved a record level of orders in the third quarter and nearly doubled our backlog, which further supports the demand underwriting our plan to expand our Baytown facility. In the fourth quarter, we also expect to make our first substantial shipments to midstream customers resulting from the newly approved FEMSA exemption process, which fast tracks approvals for larger diameter spoolable pipe and regulated midstream pipelines. We believe we are in the early stages of growth in the market. It's been slow to adopt spoolable pipe for these applications. We expect spoolable technologies adjusted EBITDA margins to be approximately 39% to 41% in the fourth quarter. which excludes $1 million of stock-based compensation expense. We project margins to be relatively stable in the fourth quarter as increased operating leverage is offset by higher input costs and typical holiday-related manufacturing inefficiencies. We're closely monitoring elevated input costs that may affect our cost structure next year. Adjusted corporate EBITDA is expected to be a charge of approximately $6 million in the fourth quarter which excludes 2 million of stock-based comp. To close our remarks, I'd like to start by thanking our associates for sustaining such a high level of business performance this year. Both of our segments are undergoing transformational initiatives as we continue the full integration of our Cactus International business while expanding and diversifying the manufacturing footprint of our Spoolable Technologies business, all while safely executing at the high level our customers demand. The cactus culture is on display as our domestic business is as resilient and profitable as ever, and we are enthusiastic about the trajectory of midstream spillable sales to come as the market digests the recent FEMSA ruling. Our international pressure control business is executing well in spite of challenging market conditions brought on by the war, and the business is beginning to secure meaningful orders for shipments next year through a transformed supply chain while our international spoolable technologies business is growing rapidly. I'm very pleased to begin the journey towards establishing a spoolable manufacturing footprint in the Mideast. As always, we'll continue to operate the business with a focus on safety, returns, margins, and customer execution. With that, I'll turn it back over to the operator and we can begin Q&A. Operator?
Operator
Conference Call Operator
Thank you. At this time, we will conduct the question and answer session. As a reminder, to ask a question, you will need to press star 11 on your telephone and wait for your name to be announced. To withdraw your question, please press star 11 again. Please stand by while we compile the Q&A roster. Our first question comes from the line of Arun Jairam from JPMorgan Securities. Your line is now open.
Arun Jayaram
Analyst, JPMorgan Securities
Good morning. Yeah, good morning, team. My question is I wanted to see if you can maybe elaborate on how the capacity expansion that you previously announced at Baytown plus this Middle East expansion will support Cactus's ability to drive volumes higher in spoolables. If we look at This year, for example, your revenue in spoolables look to be up 23% or so. And so I guess we're just trying to understand as we start thinking about modeling the company over a multi-year basis, what kind of volume growth could we see between this combination of Baytown, where I believe you're adding some roofline, maybe moving to three shifts, and then also this Middle East expansion.
Scott Bender
Chairman and Chief Executive Officer
What a very surprising question. So the Baytown expansion, which is currently underway but not fully realized, will add about 20% to our Baytown capacity. And then if we take that number and divide it, as I mentioned before, divide it by 0.6, that will give you are total potential revenue capacity or production capacity. So I'm sure you can do that math. But it has a very, very serious impact on our spoolable technologies revenue stream. And I think importantly, although you didn't ask the question, unlike pressure control, the margins are not going to suffer by virtue of being more exposed to internet.
Arun Jayaram
Analyst, JPMorgan Securities
Got it, got it. That's super helpful. I did go to UT Austin, but I can't do that math in my head as well. Good school. I hope my kid's going to get in, but we will see. Last question for me is I wanted to talk a little bit about... Your anticipation and where we could start to see a little bit of an order inflection in Cactus International. Obviously, a lot of security challenges kind of near term. But as you think about, you know, some of the deep docking, when do you expect that to maybe software we can start seeing in a backlog grow in Cactus International?
Scott Bender
Chairman and Chief Executive Officer
So I'll let Tadlock respond to that. But you're already seeing it.
Steve Tadlock
CEO, Cactus International
Yeah. Yeah. So we saw that happen this quarter. So I think in the Q&A last quarter, I mentioned we'd seen a de-stocking of inventory in the Middle East for the first half of the year, which we believe was driven largely by the conflict and then a strong order activity in years prior. orders in the first half for that region had been pretty much all services related, so repairs and spares as that took priority for customers. But as we anticipated, we saw a significant recovery this quarter in multiple countries in the Middle East, not just one or two. These orders do have delivery terms of nine to 15 months, depending on what their timeline is. Yeah, as I said, I think that should continue in Q4, and then hopefully we're in more of a normal pace in 2027.
Arun Jayaram
Analyst, JPMorgan Securities
Great. Thank you very much.
Scott Bender
Chairman and Chief Executive Officer
Thanks, Brian.
Operator
Conference Call Operator
Thank you. Our next question comes from the line of Derek Podheiser from Piper Sandler. Your line is now open.
Derek Podhaizer
Analyst, Piper Sandler
Hey, good morning, everyone. Good morning. I guess sticking on spoolables first, interesting comment to Arun's question as far as the margin profile should not suffer by virtue of international exposure. Obviously, this is an incredible growth opportunity for you guys, but maybe you can unpack that for us just a little bit more, just considering international tends to be a lower-priced environment, but you guys have always historically driven premium margins. So maybe just maybe just a little more color on that as far as you know, why you're able to hold the margins that you've been used to with with spools ever since you bought flex steel a few years ago.
Scott Bender
Chairman and Chief Executive Officer
I can probably sum that up by telling you that large diameter, where you know, we still are the only spoolable company that can produce large high pressure diameter pipe. And so that certainly supports a margin that's consistent with what we see in North America.
Derek Podhaizer
Analyst, Piper Sandler
Got it. Okay. That's helpful. It makes sense. And then switching over to pressure control, you know, just kind of looking back at the guide, I think you guide third quarter to be around that 23% to 25%. It came in greater than 28%. the 4Q guy went back to that original 3Q, back down to 23, 25. So could you just, you know, piece it together for us, maybe the drivers behind the big beat for this quarter, exceeding 28%, but then also why returning back down to the 23 to 25% level? Thanks.
Scott Bender
Chairman and Chief Executive Officer
Okay, Jay.
Jay Nutt
Chief Financial Officer
Yeah, the outperformance in Q3, as I mentioned, we had some better than anticipated performance on spares and repairs margins. a little bit additional synergy realization accomplished from actions completed in Q2, Derek. Obviously the tariffs we already knew about when we gave our guidance. Going into Q4, really the customer mix and the equipment versus service mix is the driver of the margin degradation quarter over quarter that will take us back to 23 to 25.
Derek Podhaizer
Analyst, Piper Sandler
Great. Appreciate the comments, Scott and Jay. I'll turn it back. Thank you, sir.
Operator
Conference Call Operator
Thank you. Our next question comes from the line of Steven Gingaro with Stiefel. Your line is now open.
Scott Bender
Chairman and Chief Executive Officer
Hi, Steven. How are you?
Stephen Gengaro
Analyst, Stifel
Good. Thanks for taking the question. A couple of things for me. I think the first one, you mentioned the Middle East penetration. and I think you talked about being qualified and having a lot of confidence. Is that process easier for pullables than it is for the pressure control business? I mean, I'm just sort of thinking about the traction you're getting there and how to think about the ramp in that market. I mean, clearly you're building a facility, you're ultra confident, but I just wanted to understand that a little better.
Scott Bender
Chairman and Chief Executive Officer
Yeah, well, Stephen, it ain't easy, but we are much, much further along. It's We knew this was coming. And so we've developed the products and began testing well in advance. Frankly, Baker had relaxed their attention on testing requirements for customers in the Mideast, whereas Spoolables did not. So I think that we'll probably be done. All the testing is underway. and going as planned so that by the end of the first quarter, beginning of the second quarter, it'll be done, but we're not seeing any hiccups at all.
Stephen Gengaro
Analyst, Stifel
Thank you. And the other question is on the US pressure control. I know I'm not allowed to ask you specifically about market share anymore, but when you think about the activity levels we've seen in the U.S. market, and we've seen a lot of privates kind of ramp to my knowledge, and I'm hearing some publics are as well. Historically, your share with privates was lower, and I know it improved kind of post-COVID. I'm just curious how we should think about your growth relative to overall market growth if it's driven by privates.
Scott Bender
Chairman and Chief Executive Officer
Well, everything you said is true, but in conversations with our customers, which is really the best proxy for us, we see that the first quarter is going to be a strong market share quarter for us. So for those of you that are wondering when we stopped reporting market share, if that was sort of foreshadowing decline, The answer is no. And I think that you'll see, although I can't quantify that for you, I think you'll see an improved market share statistic metric by the end of the first quarter, through the end of the first quarter.
Stephen Gengaro
Analyst, Stifel
Okay. And just a quick follow-up to that. And based on your numbers, clearly the share hasn't gone down. But you mentioned in the first quarter – Assuming based on your history, when you do gain share, it's very sticky. So that's a comment we should hold going forward through the first quarter.
Scott Bender
Chairman and Chief Executive Officer
Yeah. Great.
Stephen Gengaro
Analyst, Stifel
Thank you. Thank you.
Scott Bender
Chairman and Chief Executive Officer
Thank you, Stephen. Do we have any other questions, if not?
Jay Nutt
Chief Financial Officer
Thank you. This ends our question and answer session, and we'll turn it back to our speakers for closing remarks.
Scott Bender
Chairman and Chief Executive Officer
Okay. Thanks, everybody, for your attention today. Let me just sum up our conversation, and that is that our spoolable technologies business is doing magnificently right now with I think some additional products in the pipeline, which I can't really comment on right now, but some exciting news. Cactus International has hit its trough in terms of bookings, and our pressure-controlled business in the U.S. has really never performed better than it's performing now despite the impact of these tariffs on our business. So I thank you for your support. and look forward to speaking to you at any time. Thank you. Have a good day.
Jay Nutt
Chief Financial Officer
Thank you for your participation in today's conference. This does conclude the program and you may now disconnect.